Exabyte EXB-8205 Betriebsanleitung PDF herunterladen (Seite 90)

100

101

Changing Partitions

If you want to move the tape from one partition to the logical

beginning of the other partition (LBOP), use the LOCATE command

with the following parameters:

Set CP (Change Partitions) to 1 to indicate you want to change

partitions.

For Block Address, specify the block you want the tape to be

located to.

Set Partition to 0 if you want the tape located in the second

partition or 1 if you want the tape located in the first partition.

Another Way to Change Partitions An optional method for moving

from one partition to the logical beginning of the other partition is

to issue a MODE SELECT command. Specify page format (PF=1)

and send the Device Configuration Page (Page Code=10h).

Specify the following parameters:

Set CAP (Change Active Partition) to 1 to indicate that you

want the tape to be moved to the other partition.

Set Active Partition to 1 if you want to move to the first

partition, or 0 if you want to move to the second partition.

The EXB-8505 does not reposition the tape until it receives a tape

motion command that requires the repositioning, such as READ

(08h), WRITE (0Ah), or SPACE (11h).

3-28

EXB-8205 and EXB-8505

(Standard and XL)

510503

3 Implementing CTS Operations

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 445 446

Kommentare zu diesen Handbüchern

Keine Kommentare

Exabyte EXB-8205 Betriebsanleitung Seite 90

Kommentare zu diesen Handbüchern