Exabyte EXB-8205 Betriebsanleitung PDF herunterladen (Seite 183)

100

101

Byte 08 - Write Retry Count

The Write Retry Count field specifies how many times the CTS should

rewrite a physical block before an unrecoverable write error is

reported. The value for this field can only be changed when the tape

is positioned at LBOT. The valid values for this field are 00h and 0Bh.

The default value is 0Bh.

Specify 00h for this field to set the Write Retry Count to 0. Specify any

other nonzero value to set the Write Retry Count to 0Bh. A value of

00h for the Write Retry Count indicates that the CTS will not rewrite

any physical blocks during a write operation and will continue to

write additional data. If a value of 00h is used, the CTS may not be

able to recover the data written on the tape since its write integrity

cannot be guaranteed.

Note: If this field was set to 00h when the tape was written, the

WWR (Write Without Retries) bit in the MODE SENSE

Vendor Unique Parameters Page 2 will be set to 1, and you

should set the Read Retry Count byte to 00h when reading the

tape.

May 1994 EXB-8205 and EXB-8505

(Standard and XL)

10-27

10 MODE SELECT (15h) andMODE SENSE (1Ah)

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 445 446

Kommentare zu diesen Handbüchern

Keine Kommentare

Exabyte EXB-8205 Betriebsanleitung Seite 183

Kommentare zu diesen Handbüchern