Exabyte EXB-8205 Betriebsanleitung PDF herunterladen (Seite 64)

100

101

3.1 Using Data Cartridges

To ensure optimum data reliability and minimize wear on the CTS’s

recording heads, Exabyte strongly recommends the use of

EXATAPE 8mm Data Cartridges in all Exabyte 8mm CTSs.

EXATAPE 8mm Data Cartridges are available in the following

lengths: 15m, 54m, 112m, 160m XL (for the EXB-8505XL and

EXB-8205XL only).

Important

EXATAPE 160m XL 8mm Data Cartridges are intended for

use in the EXB-8505XL and EXB-8205XL only. The 160m XL

tape is equipped with a Recognition System stripe, located on

the tape leader, that enables the XL CTS to recognize the tape

as data-quality metal-particle media.

To prevent the use of inappropriate media, the EXB-8505XL

and EXB-8205XL do not accept 160m tapes without the

Recognition System stripe. If you attempt to load a 160m tape

without this stripe, the XL CTS automatically ejects it.

The EXB-8205XL and EXB-8505XL support all four sizes of EXATAPE.

The EXB-8205 and EXB-8505 do not support the 160m tape. If you

attempt to load any 160m cartridge into an EXB-8205 or EXB-8505, the

CTS automatically ejects the cartridge.

CAUTION

Do not attempt to use the 160m XL Data Cartridge in the

following Exabyte CTSs: EXB-8200, EXB-8200SX, EXB-8500,

and EXB-8500c. Although these CTSs will accept the 160m XL

cartridge, these cartridges are not supported by these drives

and should not be used.

Table 3-1 summarizes the compatibility of EXATAPE 8mm Data

Cartridges and Exabyte 8mm CTSs.

3-2

EXB-8205 and EXB-8505

(Standard and XL)

510503

3 Implementing CTS Operations

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 445 446

Kommentare zu diesen Handbüchern

Keine Kommentare

Exabyte EXB-8205 Betriebsanleitung Seite 64

Kommentare zu diesen Handbüchern