Exabyte EXB-8205 Betriebsanleitung PDF herunterladen (Seite 287)

100

101

Note: Test 101 erases the trace tables. In addition, the unload button

is disabled during this test.

Setup for Test 101

Before starting this test, power the CTS on but do not insert a data

cartridge. Issue a TEST UNIT READY (00h) command. The CTS must

return Check Condition status. Then, issue a REQUEST SENSE

command. The sense key must be set to Not Ready (no data cartridge

present).

CAUTION

When performing this test, be sure to use a data cartridge that

does not contain needed data (“scratch” data cartridge). Data

on the tape will be destroyed during the write portion of this

test.

Test 110 (Power-on Tests with Tape)

During this test, the CTS performs its power-on RAM and servo

diagnostic tests. If these tests complete successfully, the CTS returns

Good status and positions the tape at LBOT. Improper test setup

causes the CTS to return Check Condition status with the sense key

set to Illegal Request.

The CTS disconnects during this test.

Note: Test 110 erases the trace tables. In addition, the unload button

is disabled during this test.

Setup for Test 110

Before starting this test, power the CTS on and insert a write-enabled,

“scratch” data cartridge. Issue a TEST UNIT READY (00h) command.

The CTS must return Good status.

May 1994 EXB-8205 and EXB-8505

(Standard and XL)

21-7

21 SEND DIAGNOSTIC (1Dh)

1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 445 446

Kommentare zu diesen Handbüchern

Keine Kommentare

Exabyte EXB-8205 Betriebsanleitung Seite 287

Kommentare zu diesen Handbüchern